Until mid 2002 all bench shirts were based upon the forward sleeve design developed and patented by designer Gabriele Knecht. Titan set out to change that. Introduced in July 2002, the Fury bench shirt revolutionized the industry. It featured a radically different design that initially drew chuckles and even criticism from hard core fans of the existing shirt design – until the records started falling! The innovation was the 90 degree hemispherical sleeves. The Fury’s 90 degree hemispherical sleeves store energy as soon as the elbows are cracked and the bar descent begins. More energy storage (resistance) means more explosive power and bigger benches. This innovation allows a lifter to adjust the shirt to dial in more or less power. Pull the shirt up and it would reduce energy storage. Pull it down and create more energy storage. Twist or torque the sleeves in and more energy could be stored. The most copied shirt design in powerlifting history, the Fury features our NXG Plus fabric and a dynamic stretch back. The Fury for flat benchers is backed by an unmatched guarantee that’s as tough as you are: 1 year on blowouts plus an 18 month "No Run" guarantee! Learn More >

Until mid 2002 all bench shirts were based upon the forward sleeve design developed and patented by designer Gabriele Knecht. Titan set out to change that. Introduced in July 2002, the Fury bench shirt revolutionized the industry. It featured a radically different design that initially drew chuckles and even criticism from hard core fans of the existing shirt design – until the records started falling! The innovation was the 90 degree hemispherical sleeves. The Fury’s 90 degree
hemispherical sleeves store energy as soon as the elbows are cracked and the bar descent begins. More energy storage (resistance) means more explosive power and bigger benches. This innovation allows a lifter to adjust the shirt to dial in more or less power. Pull the shirt up and it would reduce energy storage. Pull it down and create more energy storage. Twist or torque the sleeves in and more energy could be stored. The most copied shirt design in powerlifting history, the Fury Custom features our NXG Plus fabric and a dynamic stretch back. The Fury Custom for flat benchers is backed by an unmatched guarantee that’s as tough as you are: 1 year on blowouts plus an 18 month "No Run" guarantee! Learn More >

INTRODUCING THE SUPER FURY - NOW WITH LOWERED AND REINFORCED NECKLINE! Until mid 2002 all bench shirts were based upon the forward sleeve design developed and patented by designer Gabriele Knecht. Titan set out to change that. Introduced in July 2002, the Fury bench shirt revolutionized the industry. It featured a radically different design that initially drew chuckles and even criticism from hard core fans of the existing shirt design – until the records started falling! The innovation was the 90 degree hemispherical sleeves. The Fury’s 90 degree hemispherical sleeves store energy as soon as the elbows are cracked and the bar descent begins. More energy storage (resistance) means more explosive power and bigger benches. This innovation allows a lifter to adjust the shirt to dial in more or less power. Pull the shirt up and it would reduce energy storage. Pull it down and create more energy storage. Twist or torque the sleeves in and more energy could be stored. The most copied shirt design in powerlifting history, the Fury 2-Ply features dual layers of our NXG Plus fabric and a dynamic stretch back. The Fury 2-Ply for flat benchers is backed by an unmatched guarantee that’s as tough as you are: 1 year on blowout plus an 18 month "No Run" guarantee! Learn More >

INTRODUCING THE SUPER FURY - NOW WITH LOWERED AND REINFORCED NECKLINE! Until mid 2002 all bench shirts were based upon the forward sleeve design developed and patented by designer Gabriele Knecht. Titan set out to change that. Introduced in July 2002, the Fury bench shirt revolutionized the industry. It featured a radically different design that initially drew chuckles and even criticism from hard core fans of the existing shirt design – until the records started falling! The innovation was the 90 degree hemispherical sleeves. The Fury’s 90 degree hemispherical sleeves store energy as soon as the elbows are cracked and the bar descent begins. More energy storage (resistance) means more explosive power and bigger benches. This innovation allows a lifter to adjust the shirt to dial in more or less power. Pull the shirt up and it would reduce energy storage. Pull it down and create more energy storage. Twist or torque the sleeves in and more energy could be stored. The most copied shirt design in powerlifting history, the Fury 2-Ply Custom features dual layers of our NXG Plus fabric and a dynamic stretch back. The Fury 2-Ply Custom for flat benchers is backed by an unmatched guarantee that’s as tough as you are: 1 year on blowout plus an 18 month "No Run" guarantee! Learn More >

The IPF approved patent pending F6 is specifically designed for arched benchers, to improve control and increase the potential for bigger benches! Like the Fury, the F6 sleeves are set at a 90 degree angle as you look down the length of the shirt. However, the big difference is in the angle of the sleeves as you look across the shirt. The sleeves on the F6 are set at a forward, tilted angle. As the lifter lies down on the bench and begins arching into position, the sleeves on the F6 tilt back to the optimum 90° angle in both planes - and only after the arched position is assumed. This means a lower groove, maximum stroke efficiency, more control and increased power! Features our NXG Plus fabric and a dynamic stretch back. The F6 for arched benchers is backed by an unmatched guarantee that’s as tough as you are: 1 year on blowouts plus an 18 month "No Run" guarantee! Learn More >

The IPF approved patent pending F6 custom is specifically designed for arched benchers, to improve control and increase the potential for bigger benches! Like the Fury, the F6 sleeves are set at a 90 degree angle as you look down the length of the shirt. However, the big difference is in the angle of the sleeves as you look across the shirt. The sleeves on the F6 are set at a forward, tilted angle. As the lifter lies down on the bench and begins arching into position, the sleeves on the F6 tilt back to the optimum 90° angle in both planes - and only after the arched position is assumed. This means a lower groove, maximum stroke efficiency, more control and increased power! Features our NXG Plus fabric and a dynamic stretch back. The F6 custom for arched benchers is backed by an unmatched guarantee that’s as tough as you are: 1 year on blowouts plus an 18 month "No Run" guarantee! Learn More >

INTRODUCING THE SUPER F6 - NOW WITH LOWERED AND REINFORCED NECKLINE! The patent pending F6 2-Ply is specifically designed for unlimited arched benchers, to improve control and increase the potential for bigger benches! Like the Fury, the F6 sleeves are set at a 90 degree angle as you look down the length of the shirt. However, the big difference is in the angle of the sleeves as you look across the shirt. The sleeves on the F6 are set at a forward, tilted angle. As the lifter lies down on the bench and begins arching into position, the sleeves on the F6 tilt back to the optimum 90° angle in both planes - and only after the arched position is assumed. This means a lower groove, maximum stroke efficiency, more control and increased power! Features our NXG Plus fabric and a dynamic stretch back. The F6 2-Ply for arched benchers is backed by an unmatched guarantee that’s as tough as you are: 1 years on blowouts plus an 18 month "No Run" guarantee! Learn More >

INTRODUCING THE SUPER F6 - NOW WITH LOWERED AND REINFORCED NECKLINE! The patent pending F6 2-Ply custom is specifically designed for unlimited arched benchers, to improve control and increase the potential for bigger benches! Like the Fury, the F6 sleeves are set at a 90 degree angle as you look down the length of the shirt. However, the big difference is in the angle of the sleeves as you look across the shirt. The sleeves on the F6 are set at a forward, tilted angle. As the lifter lies down on the bench and begins arching into position, the sleeves on the F6 tilt back to the optimum 90° angle in both planes - and only after the arched position is assumed. This means a lower groove, maximum stroke efficiency, more control and increased power! Features our NXG Plus fabric and a dynamic stretch back. The F6 2-Ply custom for arched benchers is backed by an unmatched guarantee that’s as tough as you are: 1 years on blowouts plus an 18 month "No Run" guarantee! Learn More >

The Katana A/S for arched benchers features our patent pending torque sleeve design combined with our new NXG Super Plus material. This new material is 26% thicker and stronger than the older NXG+ material. The result is double-ply type power from a single-ply IPF approved shirt. The Katana will take your benches to new heights! The Katana A/S for arched benchers is backed by an unmatched guarantee that’s as tough as you are: 2 years blowout plus an 18 month "No Run" guarantee! Learn More >