Bench Shirts

Since the 1980's Titan had created the design and concept for the revolutionary bench shirt design which was shelved until 2002 and has since been setting the standard for IPF Approved bench shirts. From our 90 degree hemispheric sleeves to our patented NXG fabrics to our patent pending torque sleeve design, Titan has originated nearly every major advancement in bench shirt technology. Plus, all our shirts are backed by an unmatched guarantee that’s as tough as you are: 12 months blowout plus an 18 month "No Run" guarantee!
Set Descending Direction

Grid  List 

per page
Angled Sleeves for Arched Benchers

Custom F6 Bench Shirt

$165.00
Item # F110 The IPF approved patent pending F6 custom is specifically designed for arched benchers, to improve control and increase the potential for bigger benches! Like the Fury, the F6 sleeves are set at a 90 degree angle as you look down the length of the shirt. However, the big difference is in the angle of the sleeves as you look across the shirt. The sleeves on the F6 are set at a forward, tilted angle. As the lifter lies down on the bench and begins arching into position, the sleeves on the F6 tilt back to the optimum 90° angle in both planes - and only after the arched position is assumed. This means a lower groove, maximum stroke efficiency, more control and increased power! Features our NXG Plus fabric and a dynamic stretch back. The F6 custom for arched benchers is backed by an unmatched guarantee that’s as tough as you are: 1 year on blowouts plus an 18 month "No Run" guarantee on NXG material ONLY!! Note: Custom shirts come with one FREE alteration. Learn More >
Front View

Custom Fury Bench Shirt

$165.00
Item # F106 Until mid 2002 all bench shirts were based upon the forward sleeve design developed and patented by designer Gabriele Knecht. Titan set out to change that. Introduced in July 2002, the Fury bench shirt revolutionized the industry. It featured a radically different design that initially drew chuckles and even criticism from hard core fans of the existing shirt design – until the records started falling! The innovation was the 90 degree hemispherical sleeves. The Fury’s 90 degree hemispherical sleeves store energy as soon as the elbows are cracked and the bar descent begins. More energy storage (resistance) means more explosive power and bigger benches. This innovation allows a lifter to adjust the shirt to dial in more or less power. Pull the shirt up and it would reduce energy storage. Pull it down and create more energy storage. Twist or torque the sleeves in and more energy could be stored. The most copied shirt design in powerlifting history, the Fury Custom features our NXG Plus fabric and a dynamic stretch back. The Fury Custom for flat benchers is backed by an unmatched guarantee that’s as tough as you are: 1 year on blowouts plus an 18 month "No Run" guarantee on NXG Material ONLY!! New: Upgrade to Super Plus material for $30 more. Note: Custom shirts come with one FREE alteration. Learn More >
Angled Sleeves for Arched Benchers

F6 Bench Shirt

$115.00
Item # F109 The IPF approved patent pending F6 is specifically designed for arched benchers, to improve control and increase the potential for bigger benches! Like the Fury, the F6 sleeves are set at a 90 degree angle as you look down the length of the shirt. However, the big difference is in the angle of the sleeves as you look across the shirt. The sleeves on the F6 are set at a forward, tilted angle. As the lifter lies down on the bench and begins arching into position, the sleeves on the F6 tilt back to the optimum 90° angle in both planes - and only after the arched position is assumed. This means a lower groove, maximum stroke efficiency, more control and increased power! Features our NXG Plus fabric and a dynamic stretch back. The F6 for arched benchers is backed by an unmatched guarantee that’s as tough as you are: 1 year on blowouts plus an 18 month "No Run" guarantee on NXG material ONLY!! For fastest delivery see our Dealer Network. For Titan delivery times see our Terms and Conditions. Learn More >
Front View

Fury Bench Shirt

$115.00
Item # F105 Until mid 2002 all bench shirts were based upon the forward sleeve design developed and patented by designer Gabriele Knecht. Titan set out to change that. Introduced in July 2002, the Fury bench shirt revolutionized the industry. It featured a radically different design that initially drew chuckles and even criticism from hard core fans of the existing shirt design – until the records started falling! The innovation was the 90 degree hemispherical sleeves. The Fury’s 90 degree hemispherical sleeves store energy as soon as the elbows are cracked and the bar descent begins. More energy storage (resistance) means more explosive power and bigger benches. This innovation allows a lifter to adjust the shirt to dial in more or less power. Pull the shirt up and it would reduce energy storage. Pull it down and create more energy storage. Twist or torque the sleeves in and more energy could be stored. The most copied shirt design in powerlifting history, the Fury features our NXG Plus fabric and a dynamic stretch back. The Fury for flat benchers is backed by an unmatched guarantee that’s as tough as you are: 1 year on blowouts plus an 18 month "No Run" guarantee on NXG Material ONLY!! For fastest delivery see our Dealer Network. For Titan delivery times see our Terms and Conditions. Learn More >
Angled Sleeves for Arched Benchers and Patent Pending Torque Sleeve Design

Katana A/S (Angled Sleeve) Bench Shirt

$165.00
Item # K113 The Katana A/S for arched benchers features our patent pending torque sleeve design combined with our new NXG Super Plus material. This new material is 26% thicker and stronger than the older NXG+ material. The result is double-ply type power from a single-ply IPF approved shirt. The Katana will take your benches to new heights! The Katana A/S for arched benchers is backed by an unmatched guarantee that’s as tough as you are: 2 years blowout plus an 18 month "No Run" guarantee on NXG material ONLY!! For fastest delivery see our Dealer Network. For Titan delivery times see our Terms and Conditions. Learn More >
Straight Sleeves for Flat Benchers and Patent Pending Torque Sleeve Design

Katana S/S (Straight Sleeve) Bench Shirt

$165.00
Item # K115 The Katana S/S for flat benchers features our patent pending torque sleeve design combined with our new NXG Super Plus material. This new material is 26% thicker and stronger than the older NXG+ material. The result is double-ply type power from a single-ply IPF approved shirt. The Katana will take your benches to new heights! The Katana S/S for flat benchers is backed by an unmatched guarantee that’s as tough as you are: 2 years blowout plus an 18 month "No Run" guarantee on NXG material ONLY!! For fastest delivery see our Dealer Network. For Titan delivery times see our Terms and Conditions. Learn More >
Angled Sleeves for Arched Benchers and Patent Pending Torque Sleeve Design

Super Katana A/S (Angled Sleeve) Bench Shirt

$195.00
Item # K121 The Super Katana A/S for arched benchers features our improved IPF approved Super Collar design. It's wider, heavier, and cut lower for greatly improved performance. The new lower cut neck reduces likelihood of the shirt riding up and putting pressure on the neck while the increased width and thickness of the Super Collar acts as an energy band to create more resistance and store more energy than regular Katana's. These two simple changes produce a huge improvement in performance.Rounding out the Super Katana is our patent pending torque sleeve design combined with our new NXG Super Plus material. This new material is 26% thicker and stronger than the older NXG+ material. The result is double-ply type power from a single-ply IPF approved shirt. The Katana will take your benches to new heights! The Super Katana A/S for arched benchers is backed by an unmatched guarantee that’s as tough as you are: 2 years blowout plus an 18 month "No Run" guarantee on NXG Material ONLY!!
The Perfect Fit for the Perfect Bench For fastest delivery see our Dealer Network. For Titan delivery times see our Terms and Conditions. Learn More >
Straight Sleeves for Flat Benchers and Patent Pending Torque Sleeve Design

Super Katana S/S (Straight Sleeve) Bench Shirt

$195.00
Item # K123 Designed for flat benchers the Super Katana S/S features our improved IPF approved Super Collar design. It's wider, heavier, and cut lower for greatly improved performance. The new lower cut neck reduces likelihood of the shirt riding up and putting pressure on the neck while the increased width and thickness of the Super Collar acts as an energy band to create more resistance and store more energy than regular Katana's. These two simple changes produce a huge improvement in performance. Rounding out the Super Katana is our patent pending torque sleeve design combined with our new NXG Super Plus material. This new material is 26% thicker and stronger than the older NXG+ material. The result is double-ply power in a n IPF approved single ply shirt. The Super Katana will take your benches to new heights! The Super Katana S/S for flat benchers is backed by an unmatched guarantee that’s as tough as you are: 2 years on blowout plus an 18 month "No Run" guarantee on NXG material ONLY!! For fastest delivery see our Dealer Network. For Titan delivery times see our Terms and Conditions. Learn More >
Set Descending Direction

Grid  List 

per page